tetano
Editor, Senior Moderator
PLoS One
. 2021 Mar 3;16(3):e0248099.
doi: 10.1371/journal.pone.0248099. eCollection 2021.
Medical face masks offer self-protection against aerosols: An evaluation using a practical in vitro approach on a dummy head
Christian M Sterr[SUP] 1 [/SUP], Inga-Lena Nickel[SUP] 1 [/SUP], Christina Stranzinger[SUP] 1 [/SUP], Claudia I Nonnenmacher-Winter[SUP] 1 [/SUP], Frank G?nther[SUP] 1 [/SUP]
Affiliations
Abstract
Since the appearance of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the question regarding the efficacy of various hygiene measures and the use of personal protective equipment (PPE) has become the focus of scientific and above all public discussion. To compare respirators, medical face masks, and cloth masks and determine if it is recommendable to wear face masks to protect the individual wearer of the mask from inhaling airborne particles, we challenged 29 different masks with aerosols and tested the pressure drop as a surrogate for breathing resistance owing to the mask material. We found that Type II medical face masks showed the lowest pressure drop (12.9?6.8 Pa/cm2) and therefore additional breathing resistance, whereas respirators such as the KN95 (32.3?7.0 Pa/cm2) and FFP2 (26.8?7.4 Pa/cm2) showed the highest pressure drops among the tested masks. The filtration efficacy of the mask material was the lowest for cloth masks (28?25%) followed by non-certified face masks (63?19%) and certified medical face masks (70?10%). The materials of the different respirators showed very high aerosol retentions (KN95 [94?4%] and FFP2 [98?1%]). For evaluating the as-worn filtration performance simulating real live conditions each mask type was also tested on a standardized dummy head. Cloth masks and non-EN-certified face masks had the worst as-worn filtration efficacies among the tested masks, filtering less than 20% of the test aerosol. Remarkably, certified type II medical face masks showed similar (p>0.5) as-worn filtration results (47?20%) than KN95 masks (41?4%) and FFP2 masks (65?27%), despite having a lower pressure drop. Face shields did not show any significant retention function against aerosols in our experiment. Our results indicate that it seems recommendable to wear face masks for providing base protection and risk reduction against inhaling airborne particles, in low-risk situations. In our study, especially EN 14683 type II certified medical face masks showed protective effectiveness against aerosols accompanied by minimal additional breathing resistance. FFP2 Respirators, on the other hand, could be useful in high-risk situations but require greater breathing effort and therefore physical stress for users.
. 2021 Mar 3;16(3):e0248099.
doi: 10.1371/journal.pone.0248099. eCollection 2021.
Medical face masks offer self-protection against aerosols: An evaluation using a practical in vitro approach on a dummy head
Christian M Sterr[SUP] 1 [/SUP], Inga-Lena Nickel[SUP] 1 [/SUP], Christina Stranzinger[SUP] 1 [/SUP], Claudia I Nonnenmacher-Winter[SUP] 1 [/SUP], Frank G?nther[SUP] 1 [/SUP]
Affiliations
- PMID: 33657178
- DOI: 10.1371/journal.pone.0248099
Abstract
Since the appearance of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the question regarding the efficacy of various hygiene measures and the use of personal protective equipment (PPE) has become the focus of scientific and above all public discussion. To compare respirators, medical face masks, and cloth masks and determine if it is recommendable to wear face masks to protect the individual wearer of the mask from inhaling airborne particles, we challenged 29 different masks with aerosols and tested the pressure drop as a surrogate for breathing resistance owing to the mask material. We found that Type II medical face masks showed the lowest pressure drop (12.9?6.8 Pa/cm2) and therefore additional breathing resistance, whereas respirators such as the KN95 (32.3?7.0 Pa/cm2) and FFP2 (26.8?7.4 Pa/cm2) showed the highest pressure drops among the tested masks. The filtration efficacy of the mask material was the lowest for cloth masks (28?25%) followed by non-certified face masks (63?19%) and certified medical face masks (70?10%). The materials of the different respirators showed very high aerosol retentions (KN95 [94?4%] and FFP2 [98?1%]). For evaluating the as-worn filtration performance simulating real live conditions each mask type was also tested on a standardized dummy head. Cloth masks and non-EN-certified face masks had the worst as-worn filtration efficacies among the tested masks, filtering less than 20% of the test aerosol. Remarkably, certified type II medical face masks showed similar (p>0.5) as-worn filtration results (47?20%) than KN95 masks (41?4%) and FFP2 masks (65?27%), despite having a lower pressure drop. Face shields did not show any significant retention function against aerosols in our experiment. Our results indicate that it seems recommendable to wear face masks for providing base protection and risk reduction against inhaling airborne particles, in low-risk situations. In our study, especially EN 14683 type II certified medical face masks showed protective effectiveness against aerosols accompanied by minimal additional breathing resistance. FFP2 Respirators, on the other hand, could be useful in high-risk situations but require greater breathing effort and therefore physical stress for users.