tetano
Editor, Senior Moderator
Sci Rep
. 2021 May 13;11(1):10187.
doi: 10.1038/s41598-021-89503-x.
Screening of core filter layer for the development of respiratory mask to combat COVID-19
Lokesh K Pandey[SUP] 1 [/SUP], Virendra V Singh[SUP] 2 [/SUP], Pushpendra K Sharma[SUP] 1 [/SUP], Damayanti Meher[SUP] 1 [/SUP], Utpal Biswas[SUP] 1 [/SUP], Manisha Sathe[SUP] 1 [/SUP], Kumaran Ganesan[SUP] 1 [/SUP], Vikas B Thakare[SUP] 1 [/SUP], Kavita Agarwal[SUP] 3 [/SUP]
Affiliations
Abstract
The severe outbreak of respiratory coronavirus disease 2019 has increased the significant demand of respiratory mask and its use become ubiquitous worldwide to control this unprecedented respiratory pandemic. The performance of a respiratory mask depends on the efficiency of the filter layer which is mostly made of polypropylene melt blown non-woven (PP-MB-NW). So far, very limited characterization data are available for the PPE-MB-NW in terms to achieve desired particulate filtration efficiency (PFE) against 0.3 ?m size, which are imperative in order to facilitate the right selection of PP-MB-NW fabric for the development of mask. In present study, eight different kinds of PP-MB-NW fabrics (Sample A-H) of varied structural morphology are chosen. The different PP-MB-NW were characterized for its pore size and distribution by mercury porosimeter and BET surface area analyzer was explored first time to understand the importance of blind pore in PFE. The PP-MB-NW samples were characterized using scanning electron microscopy so as to know the surface morphology. The filtration efficiency, pressure drop and breathing resistance of various PP-MB-NW fabric samples are investigated in single and double layers combination against the particle size of 0.3, 0.5 and 1 ?m. The samples which are having low pore dia, high solid fraction volume, and low air permeability has high filtration efficiency (> 90%) against 0.3 ?m particle with high pressure drop (16.3-21.3 mm WC) and breathing resistance (1.42-1.92 mbar) when compared to rest of the samples. This study will pave the way for the judicial selection of right kind of filter layer i.e., PP-MB-NW fabric for the development of mask and it will be greatly helpful in manufacturing of mask in this present pandemic with desired PFE indicating considerable promise for defense against respiratory pandemic.
. 2021 May 13;11(1):10187.
doi: 10.1038/s41598-021-89503-x.
Screening of core filter layer for the development of respiratory mask to combat COVID-19
Lokesh K Pandey[SUP] 1 [/SUP], Virendra V Singh[SUP] 2 [/SUP], Pushpendra K Sharma[SUP] 1 [/SUP], Damayanti Meher[SUP] 1 [/SUP], Utpal Biswas[SUP] 1 [/SUP], Manisha Sathe[SUP] 1 [/SUP], Kumaran Ganesan[SUP] 1 [/SUP], Vikas B Thakare[SUP] 1 [/SUP], Kavita Agarwal[SUP] 3 [/SUP]
Affiliations
- PMID: 33986353
- DOI: 10.1038/s41598-021-89503-x
Abstract
The severe outbreak of respiratory coronavirus disease 2019 has increased the significant demand of respiratory mask and its use become ubiquitous worldwide to control this unprecedented respiratory pandemic. The performance of a respiratory mask depends on the efficiency of the filter layer which is mostly made of polypropylene melt blown non-woven (PP-MB-NW). So far, very limited characterization data are available for the PPE-MB-NW in terms to achieve desired particulate filtration efficiency (PFE) against 0.3 ?m size, which are imperative in order to facilitate the right selection of PP-MB-NW fabric for the development of mask. In present study, eight different kinds of PP-MB-NW fabrics (Sample A-H) of varied structural morphology are chosen. The different PP-MB-NW were characterized for its pore size and distribution by mercury porosimeter and BET surface area analyzer was explored first time to understand the importance of blind pore in PFE. The PP-MB-NW samples were characterized using scanning electron microscopy so as to know the surface morphology. The filtration efficiency, pressure drop and breathing resistance of various PP-MB-NW fabric samples are investigated in single and double layers combination against the particle size of 0.3, 0.5 and 1 ?m. The samples which are having low pore dia, high solid fraction volume, and low air permeability has high filtration efficiency (> 90%) against 0.3 ?m particle with high pressure drop (16.3-21.3 mm WC) and breathing resistance (1.42-1.92 mbar) when compared to rest of the samples. This study will pave the way for the judicial selection of right kind of filter layer i.e., PP-MB-NW fabric for the development of mask and it will be greatly helpful in manufacturing of mask in this present pandemic with desired PFE indicating considerable promise for defense against respiratory pandemic.